How Heavy Is a Pool Table? Weight Chart by Size (2026)

A pool table typically weighs between 180 and 2,500 pounds (82 to 1,134 kg), depending on its size and whether the bed is slate or wood. Slate bed tables run from about 500 lbs for a 6-foot table up to 2,500 lbs for a 12-foot table, while wood bed tables range from 180 to 600 lbs. The most common home size, the 8-foot table, weighs roughly 700 to 1,000 lbs with a slate bed or around 320 lbs with a wood bed.

Pool Table Weight by Size: Slate Bed

Slate is the standard playing surface for any table used for serious or competitive play. It stays flat over decades because it does not warp, but that stability comes with significant weight.

• 6 foot: 500 lbs (227 kg)
• 7 foot: 700 lbs (317 kg)
• 8 foot: 1,000 lbs (454 kg)
• 9 foot: 1,300 lbs (590 kg)
• 10 foot: 1,500 lbs (680 kg)
• 12 foot: 2,500 lbs (1,134 kg)

If you are comparing sizes for a home game room, our guide to 7ft, 8ft, and 9ft table sizes breaks down which dimensions fit standard room layouts.

Pool Table Weight by Size: Wood Bed

Wood bed tables use particleboard, MDF, or plywood instead of slate. They cost less and weigh far less, which makes them easier to move but also more prone to warping over time.

• 6 foot: 180 lbs (82 kg)
• 7 foot: 275 lbs (125 kg)
• 8 foot: 320 lbs (145 kg)
• 9 foot: 450 lbs (204 kg)
• 10 foot: 600 lbs (272 kg)

For a closer look at how these materials compare on durability and play quality, see our breakdown of slate vs MDF pool tables.

Why Are Pool Tables So Heavy?

Weight comes down to two things: the bed material and the frame construction. Slate is dense natural stone, and a standard 3-piece slate bed runs about 1 inch thick, though 1/2 inch, 3/4 inch, and 7/8 inch slabs are also common. One-piece slate beds, found on smaller or less expensive tables, are usually 3/4 inch thick.

The frame adds more mass on top of the bed. Higher-end tables use solid hardwood, and some commercial-grade tables add steel or cast iron reinforcement under the rails to keep the slate from shifting during play.

How to Tell If Your Table Has a Slate or Wood Bed

You can usually tell without disassembling anything. Slate beds are grey and cold to the touch, while wood beds are wood-colored and feel warmer. A simple test: try to lift one corner of the table slightly. If it lifts with moderate effort, it is almost certainly a wood bed. A true slate table will not budge without several people.

Slate vs Wood Bed: Which Should You Buy?

Wood bed tables are budget-friendly and fine for casual, occasional play. They are lighter to move and easier to set up, but they warp more easily and the playing surface degrades faster with heavy use.

Slate bed tables cost more upfront but hold their accuracy for decades. If you play regularly or want a table that performs like the ones used in tournaments, slate is the better long-term investment. Browsing used pool tables is a good way to get a quality slate table at a lower price point.

How to Move a Heavy Pool Table

Slate bed tables need to be disassembled before they can be moved safely. That means removing the rails, pockets, and felt, then lifting each slate slab out individually since a single piece can weigh 200 lbs or more on its own. Reassembly also requires releveling the slate seams so the surface plays true.

Wood bed tables are lighter and sometimes manageable with three or four people and basic moving equipment, but the risk of dropping or damaging the frame is real. For any table with a slate bed, hiring professional pool table movers is the safer and often cheaper option once you factor in potential repair costs from a DIY move gone wrong.

What Does It Cost to Move a Pool Table?

Moving cost depends on the mover's hourly rate plus the extra time needed for disassembly, transport, and reassembly with releveling. Distance, stairs, and table size all affect the total. Our pool table moving cost guide walks through typical price ranges by table type and move complexity.

What Size Pool Table Fits Your Room?

Weight is not the only factor to plan around. You also need enough open floor space to play with a full-length cue. As a general rule, keep at least 5 feet of clearance on every side of the table so players can take a full stroke without hitting a wall.

If you are buying new or replacing an existing table, coordinating delivery and installation together ensures the table is leveled correctly the first time and saves you from paying for two separate service calls.

Frequently Asked Questions

How many people does it take to move a pool table?

Most slate bed pool tables need at least four to six people, since a single slate slab can weigh 200 to 500 lbs on its own. Wood bed tables are lighter and sometimes movable with two or three strong adults. For anything with a slate bed, professional movers with the right equipment are the safer choice.

How heavy is a 7ft slate pool table?

A 7-foot slate bed pool table weighs approximately 700 lbs (317 kg). This includes the frame, rails, and the slate slabs that make up the playing surface. A comparable 7-foot wood bed table weighs closer to 275 lbs.

How do I move a heavy pool table?

Moving a heavy slate pool table means disassembling the rails, pockets, and slate before transport, then reassembling and releveling it at the new location. Each slate piece has to be carried separately because of its weight and fragility. Most owners hire specialized pool table movers rather than attempting a full disassembly and reassembly themselves.

How heavy is an average pool table?

An average pool table weighs somewhere between 320 and 1,000 lbs, with the exact figure depending on size and bed material. An 8-foot slate table, the most common size for home game rooms, generally falls between 700 and 1,000 lbs. A wood bed table of the same size weighs closer to 320 lbs.

Why are pool tables so heavy?

Pool tables are heavy because a flat, warp-resistant playing surface requires dense material, and slate is the industry standard for that job. A single 8-foot table often uses three slate pieces that together weigh 500 to 700 lbs before the frame, rails, and cushions are added. The hardwood frame and cast iron or steel components used on higher-end tables add even more weight.